Zero Tolerance Archives - Stuff For Men | Gear, Style, Bar Tools, Outdoor Essentials & More

Zero Tolerance Sinkevich Pocketknife (0462); CPM 20CV Satin-Finished Crucible Blade Steel; Red and Gray Carbon Fiber Front Scale; Titanium Back; KVT Manual Open; Reversible Pocketclip; 3.7 oz, 8.9 inch

alvin.lamkey — Tue, 17 Feb 2026 21:00:05 +0000

KVT ball-bearing system enables blade to deploy smoothly as user pulls back on ambidextrous flipper; KVT assist causes a traditional manual open to release both quickly and easily
Reversible pocketclip allows left- or right-side carry in tip-up position; holes to accommodate reverse pocketclip have tiny stainless steel collars, another fine detail not seen in most knives
Titanium frame lock and hardened steel lockbar insert guarantee knife stays during use; they protect against unintentional foldback and prevent wiggle no matter how rigorous the task at hand
ZT’s 0462 makes impressive gift for celebrating life’s most special moments, including birthdays, holidays, graduations, anniversaries, promotions, weddings, military enlistments or career changes
Blade length is 3.7 inches; blade thickness is 0.156 inches; closed length is 5.25 inches; overall length is 8.9 inches; despite extra length and thickness, 0462 is fine-tuned to weigh only 3.7 ounces

The post Zero Tolerance Sinkevich Pocketknife (0462); CPM 20CV Satin-Finished Crucible Blade Steel; Red and Gray Carbon Fiber Front Scale; Titanium Back; KVT Manual Open; Reversible Pocketclip; 3.7 oz, 8.9 inch appeared first on Stuff For Men | Gear, Style, Bar Tools, Outdoor Essentials & More.

Zero Tolerance ZT997 Knife Storage Bag, Black, 13 x 7.5 Inch (1 Piece)

alvin.lamkey — Tue, 17 Feb 2026 21:00:05 +0000

Classic all-black zt knife storage case accommodating up to 18 folding knives would benefit collectors, hunters, campers, workers, first responders and Law Enforcement officers alike
Features five pockets on each end piece and an eight-pocket removable center section attached with Velcro
Pockets are snug, deep and Well-padded to securely and safely hold knives in place; large enough to accommodate even the largest zt folding knives
Features the sleek blue zt logo Embossed on a Black faux-leather patch on the case front
A necessary, stylish and well-protected home for all users’ ZT knives

The post Zero Tolerance ZT997 Knife Storage Bag, Black, 13 x 7.5 Inch (1 Piece) appeared first on Stuff For Men | Gear, Style, Bar Tools, Outdoor Essentials & More.

Zero Tolerance Original 0762, CPM 20CV Reverse Tanto Pocketknife, 3.4-in. Blade, Manual KVT Ball Bearings Opening, Sub Frame Lock

alvin.lamkey — Tue, 17 Feb 2026 21:00:05 +0000

The ZT Original 0762 is an exceptionally hard 3.4-inch blade made with CPM 20CV Steel, offering remarkable edge retention and a two-tone satin and stonewashed finish.
The carbon fiber handle looks sleek and feels comfortable in-hand, while the blue anodized handle windows offer additional aesthetic value.
This manual folding knife opens quickly and easily with a KVT ball-bearing system and flipper, using a sub-frame lock to secure the blade into place.
The 0762 knife features a Tuned Detent System (TDSTM), which balances the detent so it’s not too heavy and not too light, providing smooth, consistent opening.
Blade length: 3.4 inches; Closed length: 4.75 inches; Open length: 8.1 inches; Weight: 2.9 oz. Made in the USA.

The post Zero Tolerance Original 0762, CPM 20CV Reverse Tanto Pocketknife, 3.4-in. Blade, Manual KVT Ball Bearings Opening, Sub Frame Lock appeared first on Stuff For Men | Gear, Style, Bar Tools, Outdoor Essentials & More.

Zero Tolerance 0230, Jens Anso Design, Manual Opening Slip Joint Folding Knife, Black, Carbon Fiber

alvin.lamkey — Tue, 17 Feb 2026 21:00:05 +0000

20CV sheepsfoot blade and ultra-lightweight carbon fiber handle for a simple
Manual opening with full carbon fiber handle
This non-locking slip-joint knife features a double detent system—to keep the blade safely closed for carrying and a second detent to ensure a controlled open and close.
You’ll also notice that there’s no logo on the side of the blade. To maintain the knife clean look, we put our name on the spine instead.
Made in the USA, blade length: 2. 6 in. (6. 6 cm)

The post Zero Tolerance 0230, Jens Anso Design, Manual Opening Slip Joint Folding Knife, Black, Carbon Fiber appeared first on Stuff For Men | Gear, Style, Bar Tools, Outdoor Essentials & More.

Flat Gray Titanium Deep Carry Pocket Clip For Zero Tolerance ZT0350 ZT0300 ZT0301

alvin.lamkey — Tue, 17 Feb 2026 21:00:05 +0000

Custom USA made upon order. Production wait time is required.
6AL4V Grade 5 Titanium Deep Carry Pocket Clip With 18-8 Stainless Steel Screws
Knife Not Included

The post Flat Gray Titanium Deep Carry Pocket Clip For Zero Tolerance ZT0350 ZT0300 ZT0301 appeared first on Stuff For Men | Gear, Style, Bar Tools, Outdoor Essentials & More.

Zero Tolerance 0004, ZT Original Design, Full Tang Fixed Blade Knife, Made in the USA, CPM Cru-Wear, Leather Sheath

alvin.lamkey — Tue, 17 Feb 2026 21:00:05 +0000

Made-in-the-USA fixed blade; full-tang work and bushcraft knife
CPM Cru-Wear steel provides superior edge retention, toughness, and ease of sharpening; dark bronze Cerakote coating for added blade protection
Natural color canvas micarta handle; 3D-machined, contoured surface comfortably fills the hand
Full grain, vegetable-tanned saddle tan leather sheath for left/right belt and scout carry; belt loop, Tek-Lok compatibility, and debossed ZT logos on both sides
Measures 9 inches long with a 4.2 inch blade and 4.8 inch handle. Weighs 6.1 ounces without sheath.

The post Zero Tolerance 0004, ZT Original Design, Full Tang Fixed Blade Knife, Made in the USA, CPM Cru-Wear, Leather Sheath appeared first on Stuff For Men | Gear, Style, Bar Tools, Outdoor Essentials & More.

ZT Zero Tolerance 0044BLK (S45VN, Drop Point, Black, Titanium) Pocket Knife

alvin.lamkey — Tue, 17 Feb 2026 21:00:04 +0000

Renowned for its superior edge retention, corrosion resistance, and toughness
The handle is constructed from black titanium, offering a lightweight yet robust grip
Zero Tolerance's first-ever button lock mechanism, delivering secure blade lockup and allowing for easy one-handed operation
Premium folding knife that seamlessly blends minimalist design with high-performance materials
Its high-quality materials and thoughtful design make it an excellent choice for everyday carry

The post ZT Zero Tolerance 0044BLK (S45VN, Drop Point, Black, Titanium) Pocket Knife appeared first on Stuff For Men | Gear, Style, Bar Tools, Outdoor Essentials & More.

Zero Tolerance 0707 Folding Knife, CPM 20CV Blade Steel, Tuned Detent System for Smooth Opening, 3.5 Inch Drop Point Blade, Made in the USA, Carbon Fiber

alvin.lamkey — Tue, 17 Feb 2026 21:00:04 +0000

CPM 20CV blade steel offers exceptional hardness, wear resistance, edge retention; stonewashed finish helps hide use scratches
Tuned Detent System (TDS) enables us to fine-tune the detent so it’s not too heavy, not too light and provides consistent opening even when pressure is applied to the lockbar
Blade measures 3.5 inches, .121 inches thick. The overall length when opened is 8.25 inches, 4.6 in when closed. The 0707 is lightweight at 2.3 ounces.
Partially machined carbon fiber handle looks sleek and feels comfortable in-hand, extra deep carry pocket clip provides a convenient low profile
ZT Original Design, Made in the USA

The post Zero Tolerance 0707 Folding Knife, CPM 20CV Blade Steel, Tuned Detent System for Smooth Opening, 3.5 Inch Drop Point Blade, Made in the USA, Carbon Fiber appeared first on Stuff For Men | Gear, Style, Bar Tools, Outdoor Essentials & More.

Zero Tolerance 0117, Folding Pocket Knife, 3.3 inch Sleek MagnaCut Steel Blade, Carbon Fiber Handle, DuraLock Opening Mechanism, Pocketclip

alvin.lamkey — Tue, 17 Feb 2026 21:00:04 +0000

USA-made premium folder built for slim, refined everyday carry; lightweight carbon fiber handle scales
CPM MagnaCut blade offers exceptional edge retention, toughness, and corrosion resistance; two-tone satin and stonewashed finish adds a refined look
Slim DuraLock design with custom thumb stud and precision-machined locking dowel; blade opens easily and smoothly with KVT ball-bearing system
Partial inset liners and titanium tube spacers provide strength without added weight
Wraparound deep-carry pocketclip offers a secure, balanced carry and is reversible for left/right use

The post Zero Tolerance 0117, Folding Pocket Knife, 3.3 inch Sleek MagnaCut Steel Blade, Carbon Fiber Handle, DuraLock Opening Mechanism, Pocketclip appeared first on Stuff For Men | Gear, Style, Bar Tools, Outdoor Essentials & More.

Tactical Micarta Folding Knife by Zero Tolerance

alvin.lamkey — Tue, 17 Feb 2026 21:00:04 +0000

Blade Material: CPM Magnacut with Stonewash Finish
Handle Material: Micarta / Titan
Total Length: Approximately 20.9 cm
Blade Length: Approximately 9.3 cm
Closed Length: Approximately 12.2 cm
KVT Ball-Bearing Opening System
Frame Lock, Lockbar Stabilizer (End Stop)
Reversible Deep-Carry Clip (Left/Right)
Manufacturer Part Number: 0562 MIC

The post Tactical Micarta Folding Knife by Zero Tolerance appeared first on Stuff For Men | Gear, Style, Bar Tools, Outdoor Essentials & More.